Filter
Top Products
Reelmaster 5010- HHydraulic System Page 4 - 20
Special Tools
Order these special tools from your Toro Distributor.
Hydraulic Pressure Test Kit
Toro Part Number: TOR47009
Use to take various pressure readings for diagnostic
tests. Quick disconnect fittings provided attach directly
to mating fittings on machine test ports without tools. A
high pressure hose is provided for remote readings.
Contains one each: 1000 PSI (70 bar), 5000 PSI (350
bar) and 10000 PSI (700 bar) gauges. Use gauges as
recommended in the Testing section of this chapter.
Figure 16
15 GPM Hydraulic Tester Kit (Pressure and Flow)
Toro Part Number: TOR214678
Use to test hydraulic circuits and components for flow
andpressure capacitiesas recommended in the Testing
sectionof thischapter.This testerincludesthefollowing:
1. INLET HOSE: Hose connected from the system cir-
cuit to the inlet side of the hydraulic tester.
2. LOAD VALVE: A simulated working load is created
in the circuit by turning the valve to restrict flow.
3. PRESSURE GAUGE: Glycerine filled 0 to 5000 PSI
gauge to provide operating circuit pressure.
4. FLOW METER: This meter measures actual oil flow
in the operating circuit with a gauge rated from 1 to 15
GPM(5to55LPM).
5. OUTLET HOSE: A hose from the outlet side of the
hydraulic testerconnects tothe hydraulic systemcircuit.
6. FITTINGS: An assortment ofhydraulic fittingsare in-
cluded with this kit.
Figure 17