Filter
Top Products
Reelmaster 5010- HPage 5 - 96Electrical System
Motor/Generator Assembly Service
1. Controller assembly
2. Motor/generator assembly
3. Motor/generator cover
4. Flange head screw (3 used)
5. Washer head screw (6 used)
6. Washer head screw (2 used)
7. Access cover
8. Cover gasket
9. Flat washer (2 used)
10. Flange nut (2 used)
11. Cap screw (2 used)
12. Plug (2 used)
13. O-ring
14. Button head screw (2 used)
15. O-ring
16. Woodruff key
17. Motor/generator fan
18. Spacer (2 used)
19. Nut
20. Isolator
Figure 99
70 to 80 in-lb
(8.0 to 9.0 N- m)
75 in-lb
(8.5 N-m)
70 to 80 in-lb
(8.0 to 9.0 N- m)
20 to 26 ft-lb
(28 to 35 N-m)
35 to 45 in-lb
(4.0 to 5.0 N- m)
8
11
13
1
7
12
14
15
16
17
18
4
19
3
5
6
11
5
9
10
14
18
5
2
5
5
12
13
20
95 to 105 ft-lb
(129 to 142 N-m)
IMPORTANT: When working on the motor/genera-
tor, use a clean work space with a non- metal sur-
face. The motor/generator rotor includes very
powerful magnets that can cause the rotor to move
unexpectedly if working on a metal surface. Also,
any metallic debris that gets attracted to the rotor
can damage the motor/generator after assembly.