Filter
Top Products
Reelmaster 5010- H Hydraulic SystemPage 4 - 3
General Information
Traction Unit Operator’s Manual
The Traction Unit Operator’s Manual provides informa-
tion regarding the operation, general maintenance and
maintenance intervals for your Reelmaster machine.
Refer to that publication for additional information when
servicing the machine.
48 VDC Battery Disconnect
CAUTION
Before installing, removing or servicing compo-
nents in the 48 VDC system (e.g. cutting unit mo-
tors, motor/generator), separate the 48 VDC bat-
tery disconnect. This will prevent unexpected
operation of 48 VDC system components.
The 48 VDC battery disconnect is attached to the right
frame rail under the operator seat (Fig. 1). Unplug the
disconnect to make sure that 48 VDC components do
not operate unexpectedly. Apply dielectric grease to the
contact surfaces of the battery disconnect and plug the
battery disconnect back in after service to the 48 VDC
system is completed.
1. RH frame rail 2. 48V battery disconnect
Figure 1
2
1
FRONT
Check Hydraulic Fluid
The hydraulic systemon Reelmaster 5010- H machines
is designed to operate on high quality hydraulic fluid.
The hydraulic system reservoir holds approximately 11
gallons(41.6 liters)of hydraulicfluid.Check levelof hy-
draulic fluid daily. See Traction Unit Operator’s Manu-
al for fluid level checking procedure and hydraulic oil
recommendations.
Figure 2
1. Hydraulicreservoir 2. Cap with dipstick
1
2
Hydraulic
System