Filter
Top Products
Commands Listed in Alphabetical Order
Arguments
FALL specifies t
he falling edge as the frame sync polarity.
RISe specifies the rising edge as the frame sync polarity.
Examples
BUS:B1:AUDIO:FRAMESYNC:POL ARITY FALL sets the falling e dge for frame
sync polarity.
BUS:B1:AUDIO:FRAMESYNC:POL ARITY? might return
:BUS:B1:AUDIO:FRAMESYNC:PO LARITY RISe indicating that the
polarity is set to Rise.
BUS:B<1-4>:AUDio:FRAMESync:SOUrce
Sets or returns the frame sync source waveform for the AUDIO bus.
Conditions
This command requires DPO4AUDIO application module.
Group
Bus
Syntax
BUS:B<1-4>:AUDio:FRAMESync :SOUrce {CH1|CH2|CH3|CH4|
D0|D1|D2|D3|D4|D5|D6|D7|D8 |D9|D10|D11|D12 |D13|D14|D15}
BUS:B<1-4>:AUDio:FRAMESync :SOUrce?
Arguments
CH1–CH4 or D0–D15 specifies the channel to use as the frame sync source.
Examples
BUS:B1:AUDIO:FRAMESYNC:SOU RCE CH1 sets CH1 as the frame sync source.
BUS:B1:AUDIO:FRAMESYNC:SOU RCE? might return
:BUS:B1:AUDIO:FRAMESYNC:SO URCE Ch2 indicating that the source is set to
Ch2.
BUS:B<1-4>:AUDio:TYPe
Sets or returns the audio format (type) for the AUDIO bus.
Conditions
This command requires DPO4AUDIO application module.
Group
Bus
MSO4000 and DPO4000 Series Programmer Manual 2-89