Tektronix MSO4000 Landscape Lighting User Manual


 
Appendix C: Factory Defaults
Default Setup
The following table lists the default values for each command.
NOTE. Find the most up-to-date default values for your instrument and software
by performi
ng a TekSecure command, saving the instrument setup and looking
at the instrument or setup le.
Table C-1
: Default values
Command Default value
ACQUIRE:MAGNIVU
0
ACQUIRE:MODE SAMPLE
ACQUIRE:NUMAVG
16
ACQUIRE:NUMENV
INFINI
TE
ACQUIRE:SAMPLINGMODE
RT
ACQUIRE:STATE
1
ACQUIRE:STOPAFTER RUNSTOP
ALIAS:STATE
0
AUXIN:PROBE:FORCEDRANGE
0.0
0E+00
AUXIN:PROBE:GAIN
1
BUS:B1:CAN:BITRATE
50
0000
BUS:B1:CAN:PROBE CANH
BUS:B1:CAN:SAMPLEPOINT
5
0
BUS:B1:CAN:SOURCE CH1
BUS:B1:DISPLAY:FORMAT HEXADECIMAL
BUS:B1:DISPLAY:TYPE BUS
BUS:B1:FLEXRAY:BITRATE
10000000
BUS:B1:FLEXRAY:CHA NNEL
A
BUS:B1:FLEXRAY:SIG NAL
BDIFFBP
BUS:B1:FLEXRAY:SOURCE CH1
BUS:B1:I2C:ADDRESS:RWINCLUDE
0
BUS:B1:I2C:CLOCK:SOURCE CH1
BUS:B1:I2C:DATA:SOURCE CH2
BUS:B1:LABEL
Parallel
BUS:B1:LIN:BITRATE
19200
BUS:B1:LIN:IDFORMAT NOPARITY
BUS:B1:LIN:MAXBYTEDELIM
14
MSO4000 and DPO4000 Series Programmer Manual C-1