Filter
Top Products
Commands Listed in Alphabetical Order
POWer:DISpla
y
Sets or returns the display state for the power application. This is the equivalent
to pressing the Test button and then selecting the power application. The same
control is pr
ovided for each application.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:DISplay {OFF|ON|0|1}
POWer:DISplay?
Arguments
OFF or 0 turns off the display settings.
ON or 1 turns on the display settings.
Examples
POWER:DISPLAY 1 turns on the display.
POWER:DISPLAY? might return :P OWER:DISPLAY 0 indicating that the display
is off.
POWer:GATESOurce
Sets or returns the gate source for the power application.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:GATESOurce {CH1|CH2|CH3|CH4|REF1|REF2|REF3|REF4|NONe}
POWer:GATESOurce?
Arguments
CH1–CH4 sets an analog channel as the gate source.
REF1–REF4 sets a reference as the gate source.
NONe is set when the gate source is not used in the application.
2-248 MSO4000 and DPO4000 Series Programmer Manual