Filter
Top Products
Commands Listed in Alphabetical Order
Group
Power
Syntax
POWer:HARMonics:MIL:FUNDam ental:USER:CURR ent <NR3>
POWer:HARMonics:MIL:FUNDam ental:USER:CURR ent?
Arguments
<NR3> is the current in amperes for USER CALCmethod.
Examples
POWER:HARMONICS:MIL:FUNDAM ENTAL:USER:CURR ENT 2 sets the RMS
fundamental current to 2 A in calculating limits.
POWER:HARMONICS:MIL:FUNDAM ENTAL:USER:CURR ENT? might return
:POWER:HARMONICS:MIL:FUNDA MENTAL:USER:CUR RENT 1.0000 indicating
that the RMS fundamental current for use in calculating limits is 1.0000 A.
POWer:HARMonics:MIL:LINEFREQuency
Sets or returns the line frequency for MIL-STD-1399 harmonics tests. Valid
values are 60 or 400 Hz.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:HARMonics:MIL:LINEFR EQuency <NR3>
POWer:HARMonics:MIL:LINEFR EQuency?
Arguments
<NR3> is the line frequency for MIL standard.
Examples
POWER:HARMONICS:MIL:LINEFR EQUENCY 60 sets the MIL line frequency to
60 Hz.
POWER:HARMONICS:MIL:LINEFR EQUENCY? might return
:POWER:HARMONICS:MIL:LINEF REQUENCY 400 indicating that the
MIL line frequency is set to 400 Hz.
POWer:HARMonics:MIL:POWERLEVel
Sets or returns the power level for calc
ulating limits for MIL-STD-1399
harmonics tests.
MSO4000 and DPO4000 Series Programmer Manual 2-257