Filter
Top Products
Commands Listed in Alphabetical Order
Examples
POWER:HARMONI
CS:RESULTS:IEC:POWERFACTOR?
might return
:POWER:HARMONICS:RESULTS: IEC:POWERFACTOR 9.1900E+37 indicating
that the IEC power factor is set to 9.1900E+37.
POWer:HARMo
nics:RESults:PASSFail? (Query Only)
Returns the overall harmonics test result: PASS, FAIL or NA.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:HARMonics:RESults:P ASSFail?
Examples
POWER:HARMONICS:RESULTS:P ASSFAIL? might return
:POWER:HARMONICS:RESULTS: PASSFAIL PASS indicating that the
harmonics test passed.
POWer:HARMonics:RESults:RMS? (Query Only)
Returns the root mean square value of the harmonics source waveform.
Conditions
This command requires a DPO4PWR application
module.
Group
Power
Syntax
POWer:HARMonics:RESults:R MS?
Examples
POWER:HARMONICS:RESULTS:R MS? might return
:POWER:HARMONICS:RESULTS: RMS 1.0 indicating that the harmonics source
waveform RMS is set to 1.0.
POWer:HARMonics:RESults:SAVe (No Query Form)
Saves the harmonic results to the specified file in CSV format.
Conditions
This command requires a DPO4PWR application m odule.
2-266 MSO4000 and DPO4000 Series Programmer Manual