Filter
Top Products
Commands Listed in Alphabetical Order
SEARCH:SEARC
H<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:SIZe
Sets or returns the length of the data stri ng to be used for an RS-232 trigger search
if the Trigger condition is TX.
SEARCH<x> is the search number and B<x> is the
bus number.
Conditions
This command requires a DPO4COMP application module.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:B<x>:RS232 C:TX:DATa:SIZe
SEARCH:SEARCH<x>:TRIGger:A :BUS:B<x>:RS232 C:TX:DATa:SIZe?
Arguments
<NR1> is the length of the data string in Bytes.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:RS232C:TX:DATa:VALue
Sets or returns the binary data string to be used for an RS-232 trigger search if
the condition involves RX.
SEARCH<x> is the search number and B<x> is the
bus number.
Conditions
This command requires a DPO4COMP application module.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:B<x>:RS232 C:TX:DATa:VALue
SEARCH:SEARCH<x>:TRIGger:A :BUS:B<x>:RS232 C:TX:DATa:VALue?
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:CONDition
Sets or returns the search condition for a SPI trigger search. SEARCH<x> is the
search number and
B<x> is the bus number.
Conditions
This command r equires a DPO4EMBD application module.
Group
Search
MSO4000 and DPO4000 Series Programmer Manual 2-359