Filter
Top Products
Command Groups
Table 2-31: Trigger Commands (cont.)
Command
Description
TRIGger:A:HOLDoff? Returns the A trigger holdoff
parameters
TRIGger:A:HOLDoff:TIMe Sets or returns the A trigger
holdoff time
TRIGger:A:LEVel Sets or returns the trigger
level for the A trigger
TRIGger:A:LEVel:AUXin Sets or returns the trigger
level for the AUXIN port
TRIGger:A:LEVel:CH<x> Specifies or returns the
trigger level for the specified
trigger channel
TRIGger:A:LEVel:D<x> Sets or returns the trigger
level for the specified digital
channel
TRIGger:A:LOGIc?
Returns all A trigger logic
settings
TRIGger:A:LOGIc:CLAss Sets or returns the type of A
trigger logic
TRIGger:A:LOGIc:F U NCtion Sets or returns the logical
combination of the input
channels for the A logic
trigger
TRIGger:A:LOGIc:IN Put?
Returns the logic input
values for all channels
TRIGger:A:LOGIc:IN Put:C H <x > Specifies or returns the
logic setting for the specified
channel
TRIGger:A:LOGIc:INPut:CLOCk:EDGE Sets the polarity o f the clock
channel
TRIGger:A:LOGIc:INPut:CLOCk:SOUrce Sets or returns the channel
to use as the clock source
TRIGger:A:LOGIc:INPut:D<x> Sets or returns the logic
pattern for a trigger on digital
channel <x>
TRIGger:A:LOGIc:PATtern? Returns the conditions for
generating an A logic pattern
trigger
TRIGger:A:LOGIc:PATtern:DELTa tim e Sets or returns the pattern
trigger delta time value
TRIGger:A:LOGIc:PATtern:INPut:D<x> Sets or returns the A logic
trigger pattern for a trigger
on digital channel <x>
MSO4000 and DPO4000 Series Programmer Manual 2-53