Filter
Top Products
Commands Listed in Alphabetical Order
Arguments
FALL specifies p
olarity as the clock falling edge.
RISe specifies polarity as the clock rising edge.
Examples
TRIGGER:A:SETHOLD:CLOCK:ED GE RISE spec ifies the polarity as the clock
rising edge.
TRIGGER:A:SETHOLD:CLOCK:ED GE? might return :TRIG GER:A:SETHOLD:
CLOCK:EDGE RISE
indicating that polarity is specified as the clock rising edge.
TRIGger:A:SETHold:CLOCk:SOUrce
Sets or returns the clock source for the setup and hold triggering.
Group
Trigger
Syntax
TRIGger:A:SETHold:CLOCk:SO Urce
{CH1|CH2|CH3|CH4|D0|D1|D2| D3|D4|D5|D6|D7| D8|D9|D10|D11|D12|D13|D14|D
1
TRIGger:A:SETHold:CLOCk:SO Urce?
Related Commands
TRIGger:A:SETHold:DATa:SOUrce
Arguments
CH1–CH4 or D0–D15 speci fies the input channel number. D0–D15 is only for
MSO models.
AUX or EXT specifies an external trigger using the Aux Input connector located
on the front pane
l of the oscilloscope.
Examples
TRIGGER:A:SETHOLD:CLOCK:SO URCE CH1 specifies channel 1 as the clock
input for setup and hold input.
TRIGGER:A:SETHOLD:CLOCK:SO URCE? might return :TRIGGER:A:SETHOLD:
CLOCK:SOURCE CH4
indicating that channel 4 is the clock source for the setup
and hold trigger input.
TRIGger:A:SETHold:CLOCk:THReshold
Sets or returns the clock voltage threshold for the setup and hold trigger.
Group
Trigger
MSO4000 and DPO4000 Series Programmer Manual 2-447