Filter
Top Products
Commands Listed in Alphabetical Order
Examples
POWER:SOA:LOG
:YMAX 10
sets the YMAX value to 10.0000.
POWER:SOA:LOG:YMAX ? might return :POWER:SOA:LOG:YMAX 100.0000
indicating th
at the YMAX value for log plot type is set to 100.0000.
POWer:SOA:LOG:YMIN
Sets or returns the user YMIN value for use in Log SOA calculations.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:SOA:LOG:YMIN <NR3>
POWer:SOA:LOG:YMIN?
Arguments
<NR3> is the YMIN value used for log SOA calculations.
Examples
POWER:SOA:LOG:YMIN 1 sets the YMIN value to 1.0000.
POWER:SOA:LOG:YMIN ? might return :POWER:SOA:LOG:YMIN 100.0000E-3
indicating that the YMIN value for log plot type is set to 100.0000E-3.
POWer:SOA:MASK:DEFine
Sets or returns the X (Volts) and Y (Amps) coordinates of the current SOA mask.
You can specify the number of points from 2 to 10, minimum being 2. Successive
X values must be ≥ the preceding X values. The number of XY points s ent
determines the value of NR_PT.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:SOA:MASK:DEFine <NR3>
POWer:SOA:MASK:DEFine?
Arguments
<NR3> represents SOA mask coordinates.
MSO4000 and DPO4000 Series Programmer Manual 2-291