Filter
Top Products
Commands Listed in Alphabetical Order
Arguments
ODD to display o
nly odd harmonics.
EVEN todisplayonlyevenharmonics.
ALL todisplaybothoddandevenharmonics.
Examples
POWER:HARMONICS:DISPLAY:S ELECT EVEN displays only even harmonics.
POWER:HARMONICS:DISPLAY:S ELECT? might return
:POWER:HARMONICS:DISPLAY: SELECT ALL indicating that both odd and
even harmonics are displayed.
POWer:HARMonics:DISPlay:TYPe
Sets or returns the display type for harmonics tests.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:HARMonics:DISPlay:T YPe {GRAph|TABle}
POWer:HARMonics:DISPlay:T YPe?
Arguments
GRAph displays harmonic tests results in graphical format.
TABle displays harmonic tests results in tabular format.
Examples
POWER:HARMONICS:DISPLAY:T YPE GRAph sets the display type to graphical.
POWER:HARMONICS:DISPLAY:T YPE? might return
:POWER:HARMONICS:DISPLAY: TYPE TAB indicating that the display type is
set to tabular.
POWer:HARMonics:FREQRef
Sets or returns the frequency reference used when the harmonic sta ndard is None.
Conditions
This command requires a DPO4PWR a
pplication m odule.
Group
Power
2-250 MSO4000 and DPO4000 Series Programmer Manual