Filter
Top Products
Commands Listed in Alphabetical Order
Mode is on, this
command stores a new horizontal position that is used w hen
Horizontal Delay Mode is turned off.
Group
Horizontal
Syntax
HORizontal:POSition <NR3>
HORizontal:POSition?
Related Commands
HORizontal:DELay:TIMe
Arguments
<NR3> is the horizontal position expressed as the percentage of the waveform
acquired before the trigger.
Examples
HORIZONTAL:POSITION 50 sets the horizontal position to 50%.
HORIZONTAL:POSITION? might return :HORI ZONTAL:POSITION 100
indicating that the horizontal position is set to 100%.
HORizontal:PREViewstate? (Query Only)
Retur
ns a boolean value to indicate whether the display system is in the preview
state.
Group
Horizontal
Syntax
HORizontal:PREViewstate?
Returns
<NR1> = 1 if the display system is in the preview state.
<NR1> = 0 if the display system is not in the preview state.
HORizontal:RECOrdlength
Sets the horizontal rec
ord length. The query form of this command returns the
current horizontal record length.
Group
Horizontal
MSO4000 and DPO4000 Series Programmer Manual 2-189