Filter
Top Products
Command Groups
Table 2-28: Power Commands (cont.)
Command Description
POWer:GATing Sets or returns the power application gating
POWer:HARMonics:DISPlay:SELect Sets or returns the harmonicsto be displayed
when the harmonics standard is None
POWer:HARMonics:DISPlay:TYPe Sets or returns thedisplay type for harmonics
tests
POWer:HARMonics:FREQRef Sets or returns the frequency reference
waveform for harmonics tests
POWer:HARMonics:FREQRef:
FIXEDFREQValue
Sets or returns the fixed reference frequency
value for harmonics measurements
POWer:HARMonics:IEC:CLAss Sets or returns the filtering class for IEC
harmonics
POWer:HARMonics:IEC:FILter Sets or returns the enabled state for filtering
of IEC harmonics
POWer:HARMonics:IEC:FUNDamental Sets or returns the fundamental current for
IEC harmonics
POWer:HARMonics:IEC:GROUPing Sets or returns the enabled statefor grouping
of IEC harmonics
POWer:HARMonics:IEC:INPUTPOWer Sets of returns the class D input power for
IEC harmonics
POWer:HARMonics:IEC:LINEFREQuency Sets or returns the line frequency for the IEC
standard
POWer:HARMonics:IEC:OBSPERiod Sets or returns the IEC observation period
POWer:HARMonics:IEC:POWERFACtor Sets or returns the power factor for IEC
harmonics
POWer:HARMonics:MIL:FUNDamental:
CALCmethod
Sets or returns the measurement method for
the MIL harmonics fundamental frequency
POWer:HARMonics:MIL:FUNDamental:
USER:CURRent
Sets or returns RMS amperes for User
calculation method
POWer:HARMonics:MIL:LINEFREQuency Sets o r returns the line frequency for
MIL-STD-1399 harmonics tests
POWer:HARMonics:MIL:POWERLEVel Sets or returns the power level for
MIL-STD-1399 harmonics tests
POWer:HARMonics:NR_HARMonics Sets of returns the number of harmonics (a
value in the range of 20 to 400) when the
harmonics standard is NONe
POWer:HARMonics:RESults:HAR<1-400>:
FREQuency?
Returns the frequency of the harmonic
MSO4000 and DPO4000 Series Programmer Manual 2-33