Filter
Top Products
Command Groups
Zoom Command G
roup
Use the commands in the Zoom Command Group to expand and position the
waveform display horizontally, without c hanging the time base settings.
Table 2-35:
Zoom Commands
Command
Descriptio
n
ZOOm?
Returns the
horizontal positioning and
scaling of the zoom display
ZOOm:MODe Sets or returns the zoom mode
ZOOm:ZOOM<x>?
Returns t
he current horizontal positioning
and scaling of the zoom display
ZOOm:ZOOM<x>:FACtor? Returns the zoom factor of the zoom window.
<x> can only be 1
ZOOm:ZOOM<x>:POSition Sets or returns the horizontal position of the
zoom win
dow in terms of 0 to 100% of the
overview window. <x> can only be 1
ZOOm:ZOOM<x>:SCAle Sets or returns the horizontal zoom scale of
the zoom window. <x> can only be 1
ZOOm:ZOOM<x>:STATE Specifies or returns a trace as zoomed, on or
off. <
x> can only be 1
MSO4000 and DPO4000 Series Programmer Manual 2-67