Filter
Top Products
Commands Listed in Alphabetical Order
Syntax
POWer:SWLoss:
REFLevel:ABSolute:LOWVoltage <NR3>
POWer:SWLoss:REFLevel:ABSo lute:LOWVoltage ?
Arguments
<NR3> is the low voltage reference l evel in volts.
Examples
POWER:SWLOSS:REFLEVEL:ABSO LUTE:LOWVOLTAGE 2.5 sets the absolute
reference low voltage to 2.5000 V.
POWER:SWLOSS:REFLEVEL:ABSO LUTE:LOWVOLTAGE ? might r eturn
:POWER:SWLOSS:REFLEVEL:ABS OLUTE:LOWVOLTAG E 5.0000 indicating that
the absolute reference low voltage is set to 5.0000 V.
POWer:SWLoss:REFLevel:PERCent:GATEMid
Sets or returns the mid voltage reference level used in switching loss power
measurements in percent.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:SWLoss:REFLevel:PERC ent:GATEMid <NR3>
POWer:SWLoss:REFLevel:PERC ent:GATEMid?
Arguments
<NR3> is the mid voltage reference level in volts.
Examples
POWER:SWLOSS:REFLEVEL:PERC ENT:GATEMID 30 sets the gate mid reference
voltage to 30%.
POWER:SWLOSS:REFLEVEL:PERC ENT:GATEMID ? might return
:POWER:SWLOSS:REFLEVEL:PER CENT:GATEMID 50.0000 indicating that the
gate mid reference voltage is set to 50%.
POWer:SWLoss:REFLevel:PERCent:LOWCurrent
Sets or returns the low current reference level used in switching loss power
measurements in percent.
Conditions
This command require
s a DPO4PWR application module.
MSO4000 and DPO4000 Series Programmer Manual 2-305