Filter
Top Products
Commands Listed in Alphabetical Order
CH<x>:PRObe:
ID:TYPE? (Query Only)
Returns the type of probe attached to the channel specified by <x>, where x
is the c hannel number. Level 2 (or higher) probes supply their exact product
nomenclatur
e; for Level 0 or 1 probes, a generic “No Probe Detected mes sage is
returned.
Group
Vertical
Syntax
CH<x>:PRObe:ID:TYPE?
Examples
CH1:PROBE:ID:TYPE? might return :CH1:PROBE:ID:TYPE "P6203"
indicating that P6203-type probe is attached to channel 1.
CH<x>:PRObe:MODel
Sets or returns the probe model for the specified channel. If a coded probe is
attached or the specified model is not recognized, an error event is set. The
argument must be a supported probe.
To find the list of supported probes, push the front-panel channel 1, 2, 3,or4
button, then push the lower-menu More item as many times as needed to select
Deskew.PushProbe Model on the side menu and turn knob a to help you read
from the resulting list. Alternatively, you can push Test > Analysis > Deskew >
Configure > Probe Model and read from the resulting list.
Group
Vertical
Syntax
CH<x>:PRObe:MODel<String>
CH<x>:PRObe:MODel?
CH<x>:PRObe:PROPDELay
Sets or returns the propagation delay for the probe connected to the specified
channel.
Group
Vertical
Syntax
CH<x>:PRObe:PROPDELay<NR3>
CH<x>:PRObe:PROPDELay?
MSO4000 and DPO4000 Series Programmer Manual 2-127