Filter
Top Products
Commands Listed in Alphabetical Order
:SAVe:WAVEfor
m:FILEFormat INTERNal; :SAVe:WAVEform ALL,
"D:/test_folder/test1"
saves all displayed waveforms (excluding serial
bus waveforms and digital channels for MSO models) to individual files named
D:/test_folder/test1_<wfm >.isf (for example test1_CH1 .isf).
SAVe:WAVEform:FILEFormat
Specifies or returns the file format for saved waveforms. Waveform header and
timing information is included in the resulting file of non-internal formats.
The oscilloscope saves DPO waveforms as a 500 x 200 matrix, with the fi rst
row corresponding to the most recently acquired data. The values specified by
DATa:STA Rt and DATa:STOP determine the range of waveform data to output.
In the event that DATa:STOP value is greater than the current record length, the
current record length determines the last output value.
Group
Save and Recall
Syntax
SAVe:WAVEform:FILEFormat {INTERNal|SPR EADSheet}
SAVe:WAVEform:FILEFormat?
Related Commands
CURVe, DATa, DATa:STARt, DATa:STOP, SAVe:WAVEform,
WFMInpre:NR_Pt, WFMOutpre:NR_Pt?
Arguments
INTERNal specifies that waveforms are saved in an internal format, u sing a .isf
filename extension. These files can be recalled as reference waveforms. When this
argument is specified, the settings specified via the DATa:STARt and DATa:STOP
commands have no meaning as the entire waveform is saved.
SPREADSheet specifies that waveform data is saved in a format that contains
comma delimited values. These waveform data files are named using the .csv
filename extension. Saving waveforms in CSV format enables spreadsheet
programs to import the data.
Examples
SAVE:WAVEFORM:FILEFORMAT INTERNAL specifies that the internal file format
is the format used for saving waveforms.
SAVE:WAVEFORM:FILEFORMAT? might return :SAVE:WAVEFORM:FIL EFORMAT
INTERNAL
indicating that waveforms are saved using the internal format.
SAVe:WAVEform:GATIng
Specifies whether save waveform operations should save the entire waveform
(NONe) or a specified portion of the waveform.
2-328 MSO4000 and DPO4000 Series Programmer Manual