Filter
Top Products
Commands Listed in Alphabetical Order
Syntax
POWer:HARMoni
cs:IEC:LINEFREQuency <NR3>
POWer:HARMonics:IEC:LINEFR EQuency?
Arguments
<NR3> is the line frequency. The valid values are 50 and 60.
Examples
POWER:HARMONICS:IEC:LINEFR EQUENCY 50 sets the line frequency to 50 Hz.
POWER:HARMONICS:IEC:LINEFR EQUENCY? might return
:POWER:HARMONICS:IEC:LINEF REQUENCY 60 indicating that the
line frequency value is set to 60 Hz.
POWer:HARMonics:IEC:OBSPERiod
Sets or returns the IEC observation period.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:HARMonics:IEC:OBSPER iod <NR3>
POWer:HARMonics:IEC:OBSPER iod?
Arguments
<NR3> is the IEC observation period. Valid values ranges from 0.2 to 10 s.
Examples
POWER:HARMONICS:IEC:OBSPER IOD 3 sets the IEC observation period to
3.0000 s.
POWER:HARMONICS:IEC:OBSPER IOD? might return
:POWER:HARMONICS:IEC:OBSPE RIOD 10 indicating that the IEC observation
period is set to 10 s.
POWer:HARMonics:IEC:POWERFACtor
Sets or returns the rated power factor for IEC harmonics.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
MSO4000 and DPO4000 Series Programmer Manual 2-255