Filter
Top Products
Commands Listed in Alphabetical Order
<NR1> a0turnso
ff the B trigger; any other value activates the B trigger.
Examples
TRIGGER:B:STATE ON sets the B trigger to active, making it capable of causing
trigger even
ts.
TRIGGER:B:STATE? might ret urn :T RIGGER:B:STATE 0indicating that the B
trigger is inactive and that only the A trigger causes trigger events.
TRIGger:B:TIMe
Sets or returns B trigger delay time. The B Trigger time applies only if
TRIGger:B:BY is set to TIMe.
Group
Trigger
Syntax
TRIGger:B:TIMe <NR3>
TRIGger:B:TIMe?
Related Commands
TRIGger:B:BY, TRIGger:B:EVENTS:COUNt
Arguments
<NR3> is the B trigger delay time in seconds.
Examples
TRIGGER:B:TIME 4E-6 sets the B trigger delay time to 4 µs.
TRIGGER:B:TIME? might return :TRIGGER:B:TIME 16. 0000E-9 indicating
that the B trigger time is set to 16 ns.
TRIGger:B:TYPe
Sets or returns the type of B trigger. The only supported B trigger type is EDGE.
Group
Trigger
Syntax
TRIGger:B:TYPe EDGE
TRIGger:B:TYPe?
Related Commands
TRIGger:A:TYPe
Arguments
EDGE sets the B trigger type to edge.
2-470 MSO4000 and DPO4000 Series Programmer Manual