Filter
Top Products
Commands Listed in Alphabetical Order
Conditions
This command re
quires a DPO4PWR application module.
Group
Power
Syntax
POWer:INDICators {OFF|ON|0|1}
POWer:INDICators?
Arguments
OFF or 0 turns off the measurement indicators.
ON or 1 turns on the measurement indicators.
Examples
POWER:INDICATORS 1 turns on the indicator.
POWER:INDICATORS? might return :POW ER:INDICators 0 indicating that
the indicator is off.
POWer:MODulation:SOUrce
Sets or returns the source waveform for modulation tests. The voltage source
waveform is specified using the POWer:VOLTAGESOurce command and the
current waveform is specified using the POWer:CURRENTSOurce command.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:MODulation:SOUrce {VOLTage|CURRe nt}
POWer:MODulation:SOUrce?
Arguments
VOLTage specifies voltage source waveform for modulation tests.
CURRent specifies current source waveform for modulation tests.
Examples
POWER:MODULATION:SOURCE CURRent sets the m odulation source to Current.
POWER:MODULATION:SOURCE? might return :POWER:MODULATION:SOURCE
VOLT
indicating that the modulation source is set to Voltage.
MSO4000 and DPO4000 Series Programmer Manual 2-269