Filter
Top Products
Commands Listed in Alphabetical Order
*RCL (No Query
Form)
This command restores the state of the oscilloscope from a copy of the settings
stored in memory (The settings are stored using the *SAV command).
Group
Save and Recall
Syntax
*RCL <N R1>
Related Commands
FACtory, *LRN?, RECAll:SETUp, *RST, *SAV, SAVe:SETUp
Arguments
<NR1> is a value in the range from 1 to 10, which specifies a saved setup storage
location.
Examples
*RCL 3 restores the oscilloscope from a copy of the settings stored in memory
location 3.
RECAll:SETUp (No Query Form)
Restores the state of the oscilloscope from a copy of the settings stored in memory.
The settings are stored using the
*SAV command.
Group
Save and Recall
Syntax
RECAll:SETUp {FACtory|<NR1>|<file path>}
Related Commands
FACtory, *RCL, *RST, *SAV, SAVe:SETUp, FILESystem:CWD
Arguments
FACtory restores the factory setup.
<NR1> is a value in the range from 1 to 10, which specifies a saved setup storage
location.
<file p a
th>
specifies a location for an oscilloscope setup file. <file path> is
a quoted string that de fines the file name and path. Input the file path using the
form
<drive>:/<dir>/<filename>.< extension> and one or <dir>s are
optional. If you do not specify them, the oscilloscope will read the file from the
default directory (see FILESystem:CWD ). <filename> stands for a filename; the
use of wildcard characters in filenames is not supported. Filename extensions are
not re
quired, but highly recommended.
MSO4000 and DPO4000 Series Programmer Manual 2-317