Filter
Top Products
Commands Listed in Alphabetical Order
Arguments
LESSThan sets t
he oscilloscope to trigger when the data is less than the qualifier
value.
Than sets the oscilloscope to trigger when the data is than the qualifier value.
EQUal sets the oscilloscope to trigger when the data is equal to the qualifier value.
UNEQual sets the oscilloscope to trigger when the data is not equal to the qualifier
value.
LESSEQual sets the o scilloscope to trigger when the data is less than or equal
to the qualifier value.
EQual sets the oscilloscope to trigger when the data is than or equal to the
qualifier value.
Examples
TRIGGER:A:BUS:B1:CAN:DATA: QUALIFIER LESSTHAN sets the oscilloscope
to trigger when the data is less than the qualifier value.
TRIGGER:A:BUS:B1:CAN:DATA: QUALIFIER? might return
:TRIGGER:A:BUS:B1:CAN:DATA :QUALIFIER THAN, indicating that the
oscilloscope is set to trigger when the data is than the qualifier value.
TRIGger:A:BUS:B<x>:CAN:DATa:SIZe
Sets or returns the length of the data string in bytes for a CAN trigger if the
condition is DATA or IDANDDATA. Applies to bus <x>, where x is the bus
number.
Co
nditions
This command requires a DPO4AUTO application module.
Group
Trigger
Syntax
TRIGger:A:BUS:B<x>:CAN:DAT a:SIZe <NR1>
TRIGger:A:BUS:B<x>:CAN:DAT a:SIZe?
Arguments
<NR1> is the length o f the data string in bytes.
TRIGger:A:BUS:B<x>:CAN:DATa:VALue
Sets or returns the binary data string to be used for a CAN trigger if the trigger
condition is ID o r IDANDDATA. Applies to bus <x>, where x is the bus number.
Conditions
This command requires a DPO4AUTO application module.
MSO4000 and DPO4000 Series Programmer Manual 2-399