Filter
Top Products
Commands Listed in Alphabetical Order
Arguments
<NR1> number of
bits per data point can be 8 or 16.
Examples
WFMINPRE:BIT_NR 16 sets the number of bits per waveform point to 16, for
incoming data.
WFMINPRE:BIT_NR? might return :WFMINPRE:BIT_NR 8 indicating that
incoming waveform data uses 8 bits per waveform point.
WFMInpre:BN_Fmt
Sets or returns the format of binary data for incoming waveforms.
Group
Waveform Transfer
Syntax
WFMInpre:BN_Fmt {RI|RP}
WFMInpre:BN_Fmt?
Related Commands
WFMOutpre:BN_Fmt
Arguments
RI specifies signed integer data point representation.
RP specifies positive integer data point representation.
Examples
WFMINPRE:BN_FMT RP specifies positive integer data point representation.
WFMINPRE:BN_FMT? might return :WFMINPRE:BN_FMT RI indicating that the
incoming data is currently interpreted a s signed integers.
WFMInpre:BYT_Nr
Sets or returns the data width for the incoming waveform. Changing the value of
WFMInpre:BYT_Nr also changes the value of WFMInpre:BIT_Nr.
Group
Waveform Transfer
Syntax
WFMInpre:BYT_Nr <NR1>
WFMInpre:BYT_Nr?
Related Commands
WFMInpre:BIT_Nr
MSO4000 and DPO4000 Series Programmer Manual 2-479