Filter
Top Products
Commands Listed in Alphabetical Order
POWer:SOA:MA
SK:STATe
Sets or returns the state of the mask for SOA calculations.
Conditions
Th
is command requires a DPO4PWR application module.
Group
Power
Syntax
POWer:SOA:MASK:STATe {OFF|LIMITS|POINTS}
POWer:SOA:MASK:STATe?
Arguments
OFF disables mask testing.
LIMITS enables mask testing based on limits specified using
POWer:SOA:MASK:MAXAmps, POWer:SOA:MASK:MAXVolts,and
POWer:SOA:MASK:MAXWatts commands
POINTS enables mask testing based on masks points defined.
Examples
POWER:SOA:MASK:STATEPOINT S enables mask testing power based on points
defined.
POWER:SOA:MASK:STATE? might return :POWER:SOA:MASK:STATE LIMITS
indicating that the mask testing is enabled based on limits.
POWer:SOA:MASK:STOPOnviol
Sets or returns the enabled state of the mask stop o n violation condition.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:SOA:MASK:STOPOnviol {OFF|ON|0|1}
POWer:SOA:MASK:STOPOnviol ?
Arguments
OFF or 0 enables mask stop on violations.
ON or 1 disables mask stop on violations.
2-294 MSO4000 and DPO4000 Series Programmer Manual