Filter
Top Products
Commands Listed in Alphabetical Order
Examples
BUS:B1:LIN:PO
LARITY INV ERTED
sets the LIN polarity to INVERTED..
BUS:B1:LIN:POLARITY? might return BUS:B1:LIN:PO LARITY NORMAL
indicating th
e LIN polarity is normal.
BUS:B<x>:LIN:SAMPLEpoint
Sets or returns the sample point (in %) at which to sample during each bit period.
Group
Bus
Syntax
BUS:B<x>:LIN:SAMPLEpoint <NR1>
BUS:B<x>:LIN:SAMPLEpoint?
Arguments
<NR1> is the sample point (in %) at which to sample during each bit p eriod.
Examples
BUS:B1:LIN:SAMPLEPOINT 10 sets the sample point is at 10% of the bit period
BUS:B1:LIN:SAMPLEPOINT? might return BUS:B1:LIN:SAMPLEPOINT 50
indicating that the sample point is at 50% of the bit period
BUS:B<x>:LIN:SOUrce
Sets or returns the LIN data source.
Group
Bus
Syntax
BUS:B<x>:LIN:SOUrce
{CH1|CH2|CH3|CH4|D0|D1|D2| D3|D4|D5|D6|D7| D8|D9|D10|D11|D12|D13|D14|D
1
BUS:B<x>:LIN:SOUrce?
Arguments
CH<x> specifies the LIN source channel where x is 1 to 4.
D<x> specifies the LIN source channel where x is 1 to 16.
Examples
BUS:B1:LIN:SOURCE CH4 sets the LIN source to channel 4.
BUS:B1:LIN:SOURCE? might return BUS:B1:LIN:SOURCE CH1 in
dicating
the LIN source is channel 1.
MSO4000 and DPO4000 Series Programmer Manual 2-99