Filter
Top Products
Commands Listed in Alphabetical Order
Examples
POWER:SWLOSS:
CONDUCTION:POWER:MIN?
might return
:POWER:SWLOSS:CONDUCTION:P OWER:MIN 1 indicating that the
minimum conduction power switching loss calculation is set to 1 W.
POWer:SWLos
s:DISplay
Sets or returns the display selection for switching loss results: All measurements,
energy loss measurements or power loss me asurements.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:SWLoss:DISplay {ALL|ENERGYLoss|POWERLoss}
POWer:SWLoss:DISplay?
Arguments
ALL displays both energy and power loss measurements in the results.
ENERGYLoss displays only energy loss measurements in the results.
POWERLoss displays only power loss measurements in the results.
Examples
POWER:SWLOSS:DISPLAY ENERGYLoss displays only energy loss measurements
in the results.
POWER:SWLOSS:DISPLAY ? might return :POWE R:SWLOSS:DISPLA Y ALL
indicating that the results displays both energy and power loss measurem
ents.
POWer:SWLoss:GATe:POLarity
Sets or returns the switching loss gate polarity.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:SWLoss:GATe:POLarity {FALL|RISe}
POWer:SWLoss:GATe:POLarity ?
MSO4000 and DPO4000 Series Programmer Manual 2-301