Filter
Top Products
Commands Listed in Alphabetical Order
4.0000E-9;XZE
RO - 20.0000E-6;PT_OFF 0;YUNIT “V”;YMULT
15.6250E-6;YOFF :”6.4000E+3;YZERO 0.0000
WFMOutpre:BIT_Nr
Sets and returns the number of b its per w aveform point that outgoing waveforms
contain, as specified by the DATa:SOUrce command. Changing the value of
WFMOutpre:BIT_Nr also changes the values of WFMOutpre:BYT_Or and .
Group
Waveform Transfer
Syntax
WFMOutpre:BIT_Nr <NR1>
WFMOutpre:BIT_Nr?
Related Commands
DATa:SOUrce,,WFMOutpre:BN_Fmt
Arguments
<NR1> is the number of bits per data point and can be 8 or 16.
Examples
WFMOUTPRE:BIT_NR 16 sets the number of bits per waveform point to 16 for
outgoing waveforms.
WFMOUTPRE:BIT_NR? might return :WFMOUTPRE:B
IT_NR 8
indicating that
outgoing waveforms use 8 bits per waveform point.
WFMOutpre:BN_Fmt
Sets or returns the format of binary data for outgoing waveforms specified by
the DATa:SOUrce command. Changing the value of WFMOutpre:BN_Fmt also
changes the value of DATa:ENCdg.
Group
Waveform Transfer
Syntax
WFMOutpre:BN_Fmt {RI|RP}
WFMOutpre:BN_Fmt?
Related Commands
DATa:ENCdg, DATa:SOUrce
Arguments
RI specifies signed integer data point representation.
RP specifies positive integer data point representation.
2-488 MSO4000 and DPO4000 Series Programmer Manual