Filter
Top Products
Commands Listed in Alphabetical Order
SPI specifies th
e Serial Peripheral Interface bus.
CAN specifies the Controller Area Network bus.
Examples
SEARCH:SEARCH1:TRIGGER:A: BUS? might return
SEARCH:SEARCH1:TRIGGER:A: BUS:B1:SPI:CONDI TION
SS;:SEARCH:SEARCH1:TRIGGE R:A:BUS:B2:SPI:C
ONDITION
SS;:SEARCH:SEARCH1:TRIGGE R:A:BUS:B3:SPI:C ONDITION
SS;:SEARCH:SEARCH1:TRIGGE R:A:BUS:B4:SPI:C ONDITION
SS;:SEARCH:SEARCH1:TRIGGE R:A:BUS:B1:SPI:D ATA:MOSI:VALUE "XX"
.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<1-4>:AUDio:CONDition
Sets or returns the search trigger c ondition for the AUDIO bus: Start of Frame
or Data.
Conditions
This command requires DPO4AUDIO application module.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<1-4>:AUD io:CONDition
{SOF|DATA}
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<1-4>:AUD io:CONDition?
Arguments
SOF enables triggering at the start of f
rame for the audio bus.
DATA enables triggering o n matching data for the audio bus.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<1-4>:AUDio:DATa:HIVALue
Sets or returns the search trigger data upper word for the AUDIO bus.
Conditions
This command requires DPO4AUDIO application module.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<1-4>:AUD io:DATa:HIVALue
<S
tring>
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<1-4>:AUD io:DATa:HIVALue?
2-332 MSO4000 and DPO4000 Series Programmer Manual