Filter
Top Products
Command Groups
Search Commands (cont.)
Command Description
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:LIN:DATa:HIVALue
Sets or returns the binary data string
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:LIN:DATa:QUALifier
Sets or returns the LIN data qualifier
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:LIN:DATa:SIZe
Sets or returns the length of the data string
in bytes
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:LIN:DATa:VALue
Sets or returns the binary data string used
for a LIN search
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:LIN:ERRTYPE
Sets or returns the error type used for a LIN
Search
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:LIN:IDentifier:VALue
Sets or returns the binary address string
used for LIN search
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:PARallel:VALue
Sets or returns the binary data string to be
used for a Parallel search
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:RS232C:CONDition
Sets or returns the trigger condition for an
RS-232 trigger
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:RS232C:RX:DATa:SIZe
Sets or returns the length of the data string
for an RS-232 trigger, if the trigger condition
is RX
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:RS232C:RX:DATa:VALue
Sets or returns the binary data string for an
RS-232 trigger, if the condition involves RX
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:RS232C:TX:DATa:SIZe
Sets or returns the length of the data string to
be used for an RS-232 Trigger, if the Trigger
condition is TX
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:RS232C:TX:DATa:VALue
Sets or returns the binary data string to be
used for an RS-232 trigger, if the condition
involves RX
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:SPI:CONDition
Sets or returns the search condition for SPI
search
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:SPI:DATa{:MISO|:IN}:VALue
Sets or returns the binary data string to be
used for SPI search if the search condition is
MISO or MISOMOSI
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:SPI:DATa{:M OSI|:OU T}:VALue
Sets or returns the binary data string for an
SPI search if the search condition is MISO or
MISOMOSI
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:SPI:DATa:SIZe
Sets or returns the length of the data string
in bytes to be used for SPI search
SEARCH:SEARCH<x>:TRIGger:A:BUS:
SOUrce
Sets or returns the bus for a serial search
SEARCH:SEARCH<x>:TRIGger:A:EDGE:
SLOpe
Sets or returns the slope for an edge search
SEARCH:SEARCH<x>:TRIGger:A:EDGE:
SOUrce
Sets or returns the source waveform for an
edge search
2-44 MSO4000 and DPO4000 Series Programmer Manual