Filter
Top Products
Command Groups
Table 2-31: Trigger Commands (cont.)
Command
Description
TRIGger:A:RUNT ?
Returns the current A
runt pulse trigger logic
parameters
TRIGger:A:RUNT:POLarity Sets or returns the polarity
for the A pulse runt trigger
TRIGger:A:RUNT:SOUrce Sets or returns the source
for the A pulse trigger
TRIGger:A:RUNT:WHEn Sets or returns the type
of pulse width the trigger
checks for when it uncovers
a runt
TRIGger:A:RUNT:WIDth Sets or returns the minimum
width for A pulse runt trigger
TRIGger:A:SETH old? Returns settings for setup
and hold violation triggering
TRIGger:A:SETHo ld:C LOCk?
Returns clock edge polarity,
voltage threshold and source
input forsetup/hold triggering
TRIGger:A:SETHo ld:C LOC k:ED G E Sets or returns the clock
edge polarity for setup and
hold triggering
TRIGger:A:SETHo ld:C LOC k:SOUrce Sets or returns the clock
source for the A logic trigger
setup and hold input
TRIGger:A:SETHold:CLOCk:THReshold Sets or returns the c lock
voltage threshold for setup
and hold trigger
TRIGger:A:SETHo ld:D ATa?
Returns the voltage
threshold and data source
for the setup/hold trigger
TRIGger:A:SETHold:DATa:SOUrce Sets or r eturns the data
source for the setup and hold
trigger
TRIGger:A:SETHold:DATa:THReshold Sets or returns the data
voltage threshold for setup
and hold trigger
TRIGger:A:SETH old:HOLDTime Sets or returns the hold
time for the setup and hold
violation triggering
TRIGger:A:SETHo ld:SETTime Sets or r eturns the setup
time for setup and hold
violation triggering
TRIGger:A:SETHold:THReshold:CH<x> Sets or queries the threshold
for the channel
MSO4000 and DPO4000 Series Programmer Manual 2-55