Filter
Top Products
Command Groups
Table 2-31: Trigger Commands (cont.)
Command
Description
TRIGger:A:BUS :B<x>:LIN:ID entifier:VALue Sets or returns the binary
address string used for LIN
trigger
TRIGger:A:BUS:B<x>:PARallel:VALue Sets or returns the binary
datastringtobeusedfora
Parallel trigger
TRIGger:A:BUS:B<x>:RS232C:CONDition Sets or returns the condition
for an RS-232C trigger
TRIGger:A:BUS:B<x>:RS232C:RX:DATa:SIZe Sets or returns the length of
the data string in Bytes for
an RX RS-232 Trigger
TRIGger:A:BUS:B<x>:RS232C:RX:DATa:VALue Sets or returns the binary
data string for an RX RS-232
trigger
TRIGger:A:BUS:B<x>:RS232C:TX:DATa:SIZe Sets or returns the length
of the data string for a TX
RS-232 trigger
TRIGger:A:BUS:B<x>:RS232C:TX:DATa:VALue Sets or returns the binary
data string for an RS-232
trigger if the trigger condition
involves TX
TRIGger:A:BUS:B<x>:SPI:C ONDition Sets or returns the trigger
condition for SPI triggering
TRIGger:A:BUS:B<x>:SPI:DATa{:IN|:MISO}:VALue Sets or returns the binary
datastringtobeusedforSPI
trigger
TRIGger:A:BUS:B<x>:SPI:DATa{:OUT|:MOSI}:VALue Sets or returns the binary
data string used for the SPI
trigger
TRIGger:A:BUS :B<x>:SPI:D ATa:SIZe Sets or returns the length of
thedatastringinbytestobe
used for SPI trigger
TRIGger:A:BUS :SOU rce Sets or returns the source
for a bus trigger
TRIGger:A:EDGE?
Returns the source, coupling
and source for the A edge
trigger
TRIGger:A:EDG E:COUPling Sets or returns the type
of coupling for the A edge
trigger
TRIGger:A:EDGE:SLOpe Sets or returns the slope for
the A edge trigger
TRIGger:A:EDGE:SOUrce Sets or returns the source
for the A edge trigger
2-52 MSO4000 and DPO4000 Series Programmer Manual