Filter
Top Products
Commands Listed in Alphabetical Order
Examples
WFMOUTPRE:BN_
FMT RP
specifies that outgoing waveform data will be in positive
integer format.
WFMOUTPRE:BN
_FMT?
might return :WFMOUTPRE:BN_FMT RI indicating that
the outgoing waveform data is currently in signed integer format.
WFMOutpre:BYT_Nr
Sets or returns the data width for the outgoing waveform specified by the
DATa:SOUrce command. Changing WFMOutpre:BYT_Nr also changes
WFMOutpre:BIT_Nr and .
Group
Waveform Transfer
Syntax
WFMOutpre:BYT_Nr <NR1>
WFMOutpre:BYT_Nr?
Related Commands
DATa:SOUrce,,WFMOutpre:BIT_N
r
Arguments
<NR1> is the number of bytes per data point and can be 1 or 2.
Examples
WFMOUTPRE:BYT_NR 1 sets the n umber of bytes per outgoing waveform data
point to 1, which is the default setting.
WFMOUTPRE:BYT_NR? might return :WFM OUTPRE:BYT_NR 2 indicating that
there are 2 bytes per outgoing waveform data point.
WFMOutpre:BYT_Or
Sets or returns which byte of binary waveform data is transmitted first, during
a waveform data transfer, when data points require than one byte. This
specification only has meaning when WFMOutpre:ENCdg is set to BIN and
WFMOutpre:BYT_Nr is 2. Changing WFMOutpre:BYT_Or also changes
DATa:ENCdg (if DATa:ENCdg is not ASCIi).
Group
Waveform Transfer
Syntax
WFMOutpre:BYT_Or {LSB|MSB}
WFMOutpre:BYT_Or?
MSO4000 and DPO4000 Series Programmer Manual 2-489