Filter
Top Products
Commands Listed in Alphabetical Order
SEARCH:SEARC
H<x>:TRIGger:A:BUS:B<x>:CAN:DATa:QUALifier
Sets or returns the CAN data qualifier for a search. SEARCH<x> is the search
number and
B<x> is the bus number. This only applies if the trigger condition is
IDANDDATA or
DATA.
Conditions
This command requires a DPO4AUTO application module.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:CAN:D A
Ta:QUALifier
{LESSThan|Than|EQUal|UNEQ ual|LESSEQual|EQ ual}
SEARCH:SEARCH<x>:TRIGger: A:BUS:B<x>:CAN:D ATa:QUALifier?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue
Arguments
LESSThan searches for bus data less than the val ue specified by
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue.
Than searches for bus data greater than the value specified by
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue.
EQUal searches for bus data equal to the value specified by SEARCH:
SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue.
UNEQual searches for bus data not equal to the value specified by
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue.
LESSEQual searches for bus data less equal to the value specified by
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue.
EQual searches for bus data equal to the value specified by SEARCH:
SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:VALue.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:SIZe
Sets or returns the length of the data string in bytes to be used for a CAN search if
the search condition is DATA or IDANDDATA.
SEARCH<x> is the search number
and
B<x> is the bus number.
Conditions
This command requires a DPO4AUTO application module.
Group
Search
2-336 MSO4000 and DPO4000 Series Programmer Manual