Tektronix MSO4000 Landscape Lighting User Manual


 
Commands Listed in Alphabetical Order
Arguments
FALL sets falli
ng edge as the switching loss gate polarity.
RISe sets rising edge as the switching loss gate polarity.
Examples
POWER:SWLOSS:GATE:POLARIT Y FALL sets the gate
polarity to Fall.
POWER:SWLOSS:GATE:POLARIT Y ? might return
:POWER:SWLOSS:GATE:POLARI TY RISE indicatin
g that the gate polarity
is set to Rise.
POWer:SWLoss:GATe:TURNON
Sets or returns the gate turn on level for swi
tching loss power measurements.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:SWLoss:GATe:TURNON <NR3>
POWer:SWLoss:GATe:TURNON?
Examples
POWER:SWLOSS:GATE:TURNON 3.5 sets the gate turn on level to 3.5000.
POWER:SWLOSS:GATE:TURNON ? might return :POWER:SWLOSS:GATE:TURNON
1.5
indicating that the gating turn on level is set to 1.5.
POWer:SWLoss:NUMCYCles? (Query Only)
Returns the number of cycles counted for the switching loss calculation.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:SWLoss:NUMCYCles? <NR 3>
Examples
POWER:SWLOSS:NUMCYCLES? might return the number of cycles for
switching loss calculation, if the POWer:TYPe is set to Switching Loss
(
POWer:TYPe:SWITCHingLoss). If the query times out with the Switching
2-302 MSO4000 and DPO4000 Series Programmer Manual