Filter
Top Products
Commands Listed in Alphabetical Order
Syntax
CURSor:MODe {T
RACk|INDependent}
CURSor:MODe?
Arguments
TRACk ties the navigational functionality of the two cursors together. For cursor 1
adjustments, this ties the movement of the two cursors together; however, cursor 2
continues to move independently of cursor 1.
INDependent allows independent adjustment of the two c ursors.
Examples
CURSOR:MODE TRACK specifies that the cursor positions move in unison.
CURSOR:MODE? might r eturn :CURSOR:MODE TRACK indicating that the two
cursorsmoveinunison.
CURSor:VBArs? (Query Only)
Returns the current settings for the vertical bar cursors.
Group
Cursor
Syntax
CURSor:VBArs?
Examples
CURSOR:VBARS? might return the following vertic
al bar settings
:CURSOR:VBARS:UNITS SECONDS;POSITION1 1.0000E-06;POSITION2
9.0000E-06
CURSor:VBArs:ALTERNATE<x>? (Query Only)
Returns the alternate readout for the waveform (Vbar) cursors specified by <x>.
This alternate readout is in effect when the selected waveform is a bus or digital
channel.
Group
Cursor
Syntax
CURSor:VBArs:ALTERNATE<x> ?
Arguments
X=1specifies vertical bar cursor1.
X=2specifies vertical bar cursor2.
2-136 MSO4000 and DPO4000 Series Programmer Manual