Filter
Top Products
Command Groups
Search Commands (cont.)
Command Description
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:FLEXray:DATa:SIZe
Sets or returns the length of the data string
in bytes
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:FLEXray:DATa:VALue
Sets or returns the low binary data string
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:FLEXray:EOFTYPE
Sets or returns the end of frame type
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:FLEXray:ERRTYPE
Sets or returns the error type
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:FLEXray:FRAMEID:HIVALue
Sets or returns the binary data string used
for FLEXRAY frame ID high value
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:FLEXray:FRAMEID:QUALifier
Sets or returns the FLEXRAY frame ID
qualifier
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:FLEXray:FRAMEID:VALue
Sets or returns the binary data string to be
used for FLEXRAY frame ID low value
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:FLEXray:FRAMEType
Sets or returns the frame type
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:FLEXray:HEADER:CRC
Sets or returns the CRC portion of the binary
header string
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:FLEXray:HEADER:CYCLEcount
Sets or returns the cycle count portion of the
binary header string
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:FLEXray:HEADER:FRAMEID
Sets or returns the frame id portion of the
binary header string
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:FLEXray:HEADER:INDBits
Sets or returns the indicator bits portion of
the binary header string
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:FLEXray:HEADER:PAYLength
Sets or returns the payload length portion of
the binary header string
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:I2C:ADDRess:MODe
Sets or returns the I2C address mode to 7
or 10-Bit
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:I2C:ADDRess:TYPe
Sets or returns the I2C address type to I2C
special addresses
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:I2C:ADDRess:VALue
Sets or returns the binary address string to
be used for I2C search
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:I2C:CONDition
Sets or returns the search condition for I2C
search
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:I2C:DATa:DIRection
Sets or returns the I2C search condition to
be valid on a READ, WRITE or either
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:I2C:DATa:SIZe
Sets or returns the length of the data string
inbytestobeusedforI2Csearch
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:I2C:DATa:VALue
Sets or returns the binary data string to be
used for I2C search
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:LIN:CONDition
Sets or returns the search condition for a LIN
search
MSO4000 and DPO4000 Series Programmer Manual 2-43