Filter
Top Products
Commands Listed in Alphabetical Order
Examples
POWER:QUALITY
:FREQREFERENCE CURRent
sets current as the power quality
frequency reference source.
POWER:QUALIT
Y:FREQREFERENCE?
might return
:POWER:QUALITY:FREQREFEREN CE VOLTAGE indicating that the power quality
frequency reference source is set to Voltage.
POWer:QUAL
ity:FREQuency? (Query Only)
Returns the frequency measurement.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:QUALity:FREQuency?
Examples
POWER:QUALITY:FREQUENCY? might return :POWER:QUALITY:FREQUENCY
60
indicating that the frequency is set to 60 Hz.
POWer:QUALity:ICRESTfactor? (Query Only)
Returns the current crest fa ctor measurement.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:QUALity:ICRESTfactor ?
Examples
POWER:QUALITY:ICRESTFACTOR ? might return
:POWER:QUALITY:ICRESTfacto r 1.4 indicating that the current crest factor
value is set to 1.4.
POWer:QUALity:IRMS? (Query Only)
Returns the RMS current measurement.
MSO4000 and DPO4000 Series Programmer Manual 2-277