Filter
Top Products
Commands Listed in Alphabetical Order
Examples
BUS:B1:AUDIO:
DATA:SIZE 8
sets the number of bits per word to 8.
BUS:B1:AUDIO:DATA:SIZE? might return :BUS:B1:AUDIO:DATA: SIZE 24
indicating th
at the number of bits per word is set to 24.
BUS:B<1-4>:AUDio:DATa:SOUrce
Sets or returns the data source waveform for the AUDIO bus.
Conditions
This command requires DPO4AUDIO application module.
Gr
oup
Bu
s
Syntax
BUS:B<1-4>:AUDio:DATa:SOUr ce {CH1|CH2|CH3|CH4|
D0|D1|D2|D3|D4|D5|D6|D7|D8 |D9|D10|D11|D12 |D13|D14|D15}
BUS:B
<1-4>:AUDio:DATa:SOUrce?
Arguments
CH1–Ch4 or D0–D15 specifies the channel to use for data source for the audio
bus.
Examples
BUS:B1:AUDIO:DATA:SOURCE D1 sets the data source to D1.
BUS:B1:AUDIO:DATA:SOURCE? might return :BUS:B1:A UDIO:DATA:SOURCE
CH3
indicating that the data source is set to CH3.
BUS:B<1-4>:AUDio:DISplay:FORMat
Sets or returns the display format for the AUDIO bus.
Conditions
This command requires DPO4AUDIO application module.
Group
Bus
Syntax
BUS:B<1-4>:AUDio:DISplay:F ORMat
{BINary|HEXadecimal|SIGNED DECimal}
BUS:B<1-4>:AUDio:DISplay:F ORMat?
Arguments
BINary specifies a binary data display.
HEXadecimal specifies a hexadecimal data display.
MSO4000 and DPO4000 Series Programmer Manual 2-87