Filter
Top Products
Commands Listed in Alphabetical Order
Conditions
This command re
quires a DPO4PWR application module.
Group
Power
Syntax
POWer:REFLevel:ABSolute:LO W <NR3>; Ranges={D,-1e6,+1E6}
POWer:REFLevel:ABSolute:LO W?
Arguments
<NR3> is the absolute low value in volts. Default value is 0.0E+0.
Examples
POWER:REFLEVEL:ABSOLUTE:LO W 1.0 sets the absolute high value to 1.0000.
POWER:REFLEVEL:ABSOLUTE:LO W? might return
POWER:REFLEVEL:ABSOLUTE:LO W 1.0000 indicating that the absolute low
valueissetto1V.
POWer:REFLevel:ABSolute:MID<1-3>
Sets or returns the mid reference level for measurements. MID3 is specificto
the power application.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:REFLevel:ABSolute:MI D<1-3> <NR3>; Ranges={D,-1e6,+1E6}
POWer:REFLevel:ABSolute:MI D<1-3>?
Arguments
<NR3> is the absolute mid reference value.
Examples
POWER:REFLEVEL:ABSOLUTE:MI D1 1 sets the mid reference voltage to 1V.
POWER:REFLEVEL:ABSOLUTE:MI D1? might return
POWER:REFLEVEL:ABSOLUTE:MI D1 0.0E+0 indicating that the absolute
reference voltage level is set to 0.0E+0 V.
POWer:REFLevel:HYSTeresis
Sets or returns the measurement reference level hysteresis value.
MSO4000 and DPO4000 Series Programmer Manual 2-281