Tektronix MSO4000 Landscape Lighting User Manual


 
Commands Listed in Alphabetical Order
TRIGGER:A:BUS
:B1:LIN:ERRTYPE?
might return
TRIGGER:A:BUS:B1:LIN:ERRT YPE SYNC indicating the LIN error type
is SYNC.
TRIGger:A:B
US:B<x>:LIN:IDentier:VALue
Sets or returns the binary address string used for LIN trigger if the trigger
condition is ID or IDANDDATA.
Group
Trigger
Syntax
TRIGger:A:BUS:B<x>:LIN:ID entifier:VALue <QString>
TRIGger:A:BUS:B<x>:LIN:ID entifier:VALue?
Arguments
<QString> is the binary address string used for LIN trigger if the trigger
condition is ID or IDANDDATA.
Examples
TRIGGER:A:BUS:B1:LIN:IDEN TIFIER:VALUE "110010" sets the identier
value to 110010.
TRIGGER:A:BUS:B1:LIN:IDEN TIFIER:VALUE? might return
TRIGGER:A:BUS:B1:LIN:IDEN TIFIER:VALUE "XXXXXX" indicating the
identier value is XXXXXX.
TRIGger:A:BUS:B<x>:PARallel:VALue
Sets or returns the binary data string to be used for a Parallel trigger. Applies to
bus <x>, where x is the bus number.
Group
Trigger
Syntax
TRIGger:A:BUS:B<x>:PARall el:VA
Lue <QSt ring>
TRIGger:A:BUS:B<x>:PARall el:VALue?
Arguments
<QString> is the binary data string.
TRIGger:A:BUS:B<x>:RS232C:CONDition
Sets or returns the condition for an RS-232C trigger, where x is the bus number.
2-420 MSO4000 and DPO4000 Series Programmer Manual