Filter
Top Products
Commands Listed in Alphabetical Order
Group
Bus
Syntax
BUS:B<x>:SPI:DATA{:OUT|:M OSI}:POLARity {LOW|HIGH}
BUS:B<x>:SPI:DATA{:OUT|:M OSI}:POLARity?
Arguments
LOW specifies the active low polarity.
HIGH specifies the active high polarity.
BUS:B<x>:SPI:DATA{:OUT|:MOSI}:SOUrce
Sets or returns the SPI MOSI source for bus <x, where x is the bus number>.
Conditions
This command requires a DPO4EMBD application module.
Group
Bus
Syntax
BUS:B<x>:SPI:DATA{:OUT|:M OSI}:SOUrce {CH1|CH2|CH3|CH4|
D0|D1|D2|D3|D4|D5|D6|D7|D 8|D9|D10|D11|D12 |D13|D14|D15}
BUS:B<x>:SPI:DATA{:OUT|:M OSI}:SOUrce?
Arguments
CH1-CH4 or D0-D15 is the channel to use as the SPI MISO source.
BUS:B<x>:SPI:DATA:SIZe
Sets or returns the number of bits per word for the specified SPI bus.
Group
Bus
Syntax
BUS:B<x>:SPI:DATA:SIZe <NR1>
BUS:B<x>:SPI:DATA:SIZe?
Arguments
NR1 is the data size of the specified bus.
Examples
BUS:B1:SPI:DATA:SIZE 8 sets the data size for the specified bus to 8 bits
per word.
BUS:B1:SPI:DATA:SIZE? might return BUS:B1:SPI:DATA:SIZE 8
indicating the data size for the SPI B1 bus is 8 bits per word.
2-108 MSO4000 and DPO4000 Series Programmer Manual