Filter
Top Products
Commands Listed in Alphabetical Order
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:B<x>:CAN:C ONDition
{SOF|FRAMEtype|IDentifier| DATA|IDANDDATA| EOF|ACKMISS}
SEARCH:SEARCH<x>:TRIGger:A :BUS:B<x>:CAN:C ONDition?
Arguments
SOF spec ifies a search b ased on the start of frame.
FRAMEtype specifies a search based on the frame type.
IDentifier specifies a search based on the frame identifier.
DATA specifies a search based on the frame data.
IDANDDATA specifies a search based on the frame identifier and data.
EOF specifies a search base on the end of frame.
ACKMISS specifies a search based on the missing ACK field.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:DATa:DIRection
Sets or returns the CAN search to be valid for Read, Write, or Either condition if
the criteria is IDentifier.
SEARCH<x> is the search number and B<x> is the bus
number. This only applies if the search condition is IDentifier.
Conditions
This command requires a DPO4AUTO application module.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:B<x>:CAN:D ATa:DIRection
{READ|WRITE|NOCARE}
SEARCH:SEARCH<x>:TRIGger:A :BUS:B<x>:CAN:D ATa:DIRection?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:CAN:CONDition
Arguments
READ specifies the read condition.
WRITE specifies the write condition.
NOCARE specifies either a read or write condition.
MSO4000 and DPO4000 Series Programmer Manual 2-335