Filter
Top Products
Commands Listed in Alphabetical Order
Examples
POWER:GATESOU
RCE CH1
sets the gated source as CH1.
POWER:GATESOURCE? might return POWER:GATESOURCE CH2 indicating that
CH2 is the gate
dsource.
POWer:GATing
Sets or returns the power application gating.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:GATing {OFF|SCREen|CURSor}
POWer:GATing?
Arguments
OFF turns o ff measurement gating (full record).
SCREen turns on gating, using the left and right edges of the screen.
CURSor limits measurements to the portion of the waveform between the vertical
bar cursors, even if they are off screen.
Examples
POWER:GATING CURSOr sets cursor gating o n the oscilloscope.
POWER:GATING? might return POWER:G ATING OFF indicating that gating is
turned off on the oscilloscope.
POWer:HARMonics:DISPlay:SELect
Sets or returns the harmonics to be displayed when the harmonics standard is
NONe.
Conditions
This command requires a DPO4PWR application m odule.
Group
Power
Syntax
POWer:HARMonics:DISPlay:SE Lect {ODD|EVEN|ALL}
POWer:HARMonics:DISPlay:SE Lect?
MSO4000 and DPO4000 Series Programmer Manual 2-249