Filter
Top Products
Commands Listed in Alphabetical Order
Syntax
DPO Models:
TRIGger:A:SETHold:DATa:SOU rce <wfm>
MSO Models:
TRIGger:A:SETHold:DATa:SOU rce <wfm>[,<wfm>] [,<wfm>]
[,<wfm>] [,<wfm>] [ ,<wfm>] [,<wfm>] [,<wf m>] [,<wfm>]
[,<wfm>] [,<wfm>] [ ,<wfm>] [,<wfm>] [,<wf m>] [,<wfm>]
[,<wfm>] [,<wfm>] [ ,<wfm>]
TRIGger:A:SETHold:DATa:SOU rce?
Related Commands
TRIGger:A:SETHold:CLOCk:SOUrce
Arguments
DPO Models:
<wfm> specifies the source channel number and is one of CH1-CH4, EXT or
AUX.YoucanspecifyonlyonewaveformonaDPO.
MSO Models:
<wfm> specifies the source channel numbers. Each <wfm> can be one of
CH1-CH4 or D0-D15. Auxin (EXT or AUX) is not valid as a data s ource.
Examples
TRIGGER:A:SETHOLD:DATA:SOU RCE CH1 sets channel 1 as the data source
for the setup and hold trigger.
TRIGGER:A:SETHOLD:DATA:SOU RCE? might return
:TRIGGER:A:LOGIC:SETHOLD:D ATA:SOURCE CH2 indicating that channel 2 is
the current data source for the setup and hold trigger.
TRIGger:A:SETHold:DATa:THReshold
Sets or returns the data voltage threshold for setup and hold trigger.
Group
Trigger
Syntax
TRIGger:A:SETHold:DATa:THR eshold {<NR3>|TTL}
TRIGger:A:SETHold:DATa:THR eshold?
Arguments
TTL specifies the preset TTL high level of 1.4 V.
<NR3> is the setup and hold data level, in V.
Examples
TRIGGER:A:SETHOLD:DATA:THR ESHOLD TTL specifies the preset high level of
1.4 V as the current data voltage level for the setup and hold trigger.
MSO4000 and DPO4000 Series Programmer Manual 2-449