Filter
Top Products
Commands Listed in Alphabetical Order
SIGNEDDECimal
specifies a signed decimal data display.
Examples
BUS:B1:AUDIO:DISPLAY:FORM AT BINARY sets the display format to Binary.
BUS:B1:AUDIO:DISPLAY:FORM AT? might return
:BUS:B1:AUDIO:DISPLAY:FOR MAT SIGNEDDECIMAL indicating that the
display format i s set to signed decimal.
BUS:B<1-4>:AUDio:FRAME:SIZe
Sets or returns the number of channels in each frame for the AUDIO bus.
NOTE. This command is applicable only for TDM audio bus type
(
BUS:B<x>AUDio :TYPe TDM
)
Conditions
This command requires DPO4AUDIO application module.
Group
Bus
Syntax
BUS:B<1-4>:AUDio:FRAME:SI Ze <NR1>
BUS:B<1-4>:AUDio:FRAME:SI Ze?
Arguments
<NR1> specifies the number of channels in each frame.
Examples
BUS:B1:AUDIO:FRAME:SIZE 2 sets the frame size to 2.
BUS:B1:AUDIO:FRAME:SIZE? might return :BUS:B1:AUDIO:FRAME:SIZE 8
indicating that the number of channels in each frame is set to 8.
BUS:B<1-4>:AUDio:FRAMESync:POLarity
Sets or returns the frame sync polarity for the AUDIO bus.
Conditions
This command requires DPO4AUDIO application module.
Group
Bus
Syntax
BUS:B<1-4>:AUDio:FRAMESyn c:POLarity {FALL|RISe}
BUS:B<1-4>:AUDio:FRAMESyn c:POLarity?
2-88 MSO4000 and DPO4000 Series Programmer Manual