Filter
Top Products
Commands Listed in Alphabetical Order
Related Commands
MEASUrement:R
EFLevel:METHod, MEASUrement:IMMed:TYPe,
MEASUrement:MEAS<x>:TYPe
Arguments
<NR3> is the high reference level, in volts. The default is 0.0 V.
Examples
MEASUREMENT:REFLEVEL:ABSO LUTE:HIGH 1.71 sets the high reference level
to 1.71 V.
MEASUREMENT:REFLEVEL:ABSO LUTE:HIGH? might return
:MEASUREMENT:REFLEVEL:ABS OLUTE:HIGH 1.7100E+00 indicating t hat the
absolute high reference level is set to 1 .71 V.
MEASUrement:REFLevel:ABSolute:LOW
Sets or returns the low reference level, and is the lower reference level when
MEASUrement:REFLevel:METHod is set to Absolute.
NOTE. this command affects the associated reference level parameter for all
MEASurements:IMMed and the four periodic measurements.
Group
Measurement
Syntax
MEASUrement:REFLevel:ABSo lute:LOW <NR3>
MEASUrement:REFLevel:ABSo lute:LOW?
Related Commands
MEASUrement:REFLevel:METHod, MEASUrement:IMMed:TYPe,
MEASUrement:MEAS<x>:TYPe
Arguments
<NR3> is the low reference level, in volts. The default is 0.0 V.
Examples
MEASUREMENT:REFLEVEL:ABSO LUTE:LOW 0.0 sets the low reference level
to 0.0 V.
MEASUREMENT:REFLEVEL:ABSO LUTE:LOW? might return
:MEASUREMENT:REFLEVEL:ABS OLUTE:LOW 0.0000E+00 indicating
that the absolute low reference level is set to 0.0 V.
2-228 MSO4000 and DPO4000 Series Programmer Manual