Filter
Top Products
Commands Listed in Alphabetical Order
set with the SEA
RCH:SEARCH<x>:TRIGger:A:LOWerthreshold:CH<x> and
SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:CH<x> commands.
PULSEWIdth tr
iggers when a pulse is found that has the specified
polarity and is either inside or outside the limits as specified by
SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:LESSLimit and
SEARCH:SEARCH<x>:TRIGger:A:LOGIc:PATtern:WHEn:MORELimit.
The polarity is selected using the SEARCH:SEARCH<x>:TRIGger:A:RUNT:
POLarity command.
TRANsition triggers when a pulse crosses both thresholds in the same direction
as the specified polarity and the transition time between the two threshold
crossing
s is greater or less than the specified time delta.
SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:CH<x>
Sets or returns the channel waveform upper threshold to determine where to
place a mark. This setting is applied to all channel searches that uses an upper
threshold.
SEARCH<x> is the search number and CH<x> is the channel number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A:UPPerthreshold :CH<x> {TTL}
SEARCH:SEARCH<x>:TRIGger: A:UPPerthreshold :CH<x>?
Arguments
TTL specifies a preset TTL high level of 1.4 V.
SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:MATH
Sets or returns the math waveform upper threshold to determine where to place a
mark. This setting is applied to all math waveform searches that uses an upper
threshold. <x> is the search number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger: A:UPPerthreshold :MATH {TTL}
SEARCH:SEARCH<x>:TRIGger: A:UPPerthreshold :MATH?
Arguments
TTL specifies a preset TTL high level of 1.4 V.
2-382 MSO4000 and DPO4000 Series Programmer Manual