Filter
Top Products
Commands Listed in Alphabetical Order
SEARCH:SEARC
H<x>:TRIGger:A:SETHold:DATa:SOUrce
Sets or returns the data source setting for an setup/hold trigger search to determine
wheretoplaceamark.<x>isthesearchnumber. You cannot specify the same
source for b o
th clock and data.
Group
Search
Syntax
DPO Models:
SEARCH:SEARCH<x>:TRIGger:A :SETHold:DATa:S OUrce
{CH1|CH2|CH3|CH4|MATH|REF}
MSO Models:
SEARCH:SEARCH<x>:TRIGger:A :SETHold:DATa:S OUrce <wfm>[, <wfm>]
[,<wfm>] [,<wfm>] [ ,<wfm>] [,<wfm>] [,<wf m>] [,<wfm>]
[,<wfm>] [,<wfm>] [ ,<wfm>] [,<wfm>] [,<wf m>] [,<wfm>]
[,<wfm>] [,<wfm>] [ ,<wfm>] [,<wfm>]
SEARCH:SEARCH<x>:TRIGger:A :SETHold:DATa:S OUrce?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:SETHold:CLOCk:SOUrce
Arguments
DPO Models:
CH1–CH4 specifies an input channel as the search source.
MATH specifies the math waveform as the search source.
REF specifies the reference waveform as the search source.
MSO Models:
<wfm> can be any combination of the channel, math, reference, and digital
waveforms.
SEARCH:SEARCH<x>:TRIGger:A:SETHold:DATa:THReshold
Sets or returns the data threshold setting for an setup/hold trigger search to
determine where to place a mark. <x> is the search number.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A :SETHold:DATa:T HReshold
{<NR3>|TTL}
SEARCH:SEARCH<x>:TRIGger:A :SETHold:DATa:T HReshold?
MSO4000 and DPO4000 Series Programmer Manual 2-377